No-drill · Both reversible · Engineered for the 964 & 993
The 993/964 Bundle
Two pieces, one decision: the phone where your eyes already are, coffee where Porsche left a tray and no answer. Nothing drilled. Both off without a trace.
Start here
964 or 993?
Choose the make first, then the exact model. We'll instantly confirm fitment.
Select your car to confirm fitment.
Low stock · Ships in 3–5 business days · 30-day returns · Both pieces reversible
Not sure it fits your car? Ask before you buy
Both pieces are engineered for the 964 and 993, but if you want to confirm your gauge side or console before ordering, ask us — a real answer within a day, free. Change-of-mind returns are on you: return shipping plus a 25% restocking fee, so it's cheaper to ask first. Anything defective or wrong on arrival is replaced or refunded free.
The finished cockpit
The 964/993 interior, completed the way Weissach would have
You already respect the car. The last of the air-cooled 911 line deserves a cockpit that looks like it left Zuffenhausen this way — not one improvised around with suction cups and a cup of coffee wedged between the seats.
This is the full interior in one decision. The phone mounts to the gauge cluster, so your directions sit exactly where your eyes already go for the tach. The coffee sits flush in the center console tray — the spot Porsche built and then gave you no answer for. A latte on a 993 leather seat costs more than the latte. A phone sliding off the glass at 70 costs your attention. Both problems, closed.
Six out of ten owners who buy the console cup holder take the gauge mount too. This is that pairing, priced as completion rather than two separate afterthoughts.
Built for these cars only
Not a universal part you're hoping fits
Both pieces are cut for the 964 and 993 specifically — not a generic mount adapted with foam and hope. The phone cradle clamps to the gauge pod using the factory geometry. The cup holder drops into the center console tray and fixes with two screws into existing points. No holes. No trimmed trim.
Pick your gauge side — left or right of the cluster, whichever keeps your sightline clean and your hand near the shifter. You configure the car to your habits; you're not gambling on what the aftermarket happened to make.
- Gauge side: choose Left or Right
- Console cup holder: one flush-fit spec for both cars
How it's made
Laser-cut aluminum, matched matte black, reversible in minutes
Both pieces are laser-cut aluminum in a matte black chosen to sit beside 964/993 interior trim, not shout next to it. The phone mount locks mechanically — a positive click, not a spring that fades. The cup holder holds a cup where the car never did, then lifts back out.
Nothing is permanent. Remove the two console screws, unclamp the gauge mount, and the interior is back to original — looks like it came with the car the whole time, and looks like it never happened once it's gone.
Specification
The particulars
- Fits
- Porsche 964 & 993 only
- Install time
- Under 5 minutes, both pieces
- Mount points
- Gauge pod + center console tray
- Fixing
- Factory geometry + 2 screws, no drilling
- Material
- Laser-cut aluminum, matte black
- Configuration
- Gauge side: left or right
11 bundles left
Only want the console piece?
If the phone mount isn't for you, the 964/993 center console cup holder is sold on its own — same flush fit, same two screws, same matte black. Take just the cup holder and add the gauge mount later.
Before you order
Fit, gauge side, and getting it back to stock
Which gauge does the 911 mount replace — and will mine fit?
You choose the side: Left (fuel gauge) or Right (clock) — the clock is the most common pick. It fits behind the standard gauges on air-cooled 911s from 1965–1998, including 964 and 993. Use the fitment selector with your year and model and we'll pre-select the right variant for you.
Does the phone mount work with MagSafe and Android?
MagSafe iPhones snap straight on. For any other phone, two steel adapter rings ship in the box — fix one to the phone or case and the magnet grips it the same way. Owners report it holds a Pro Max over hard bumps.
How long does installation really take — and what tools do I need?
Seat-rail cup holder: under 5 minutes with a wrench for your seat-rail bolts. 964/993 console holder: two factory screws, about 2 minutes with a ratchet. Phone mount: about 5 minutes — you'll want a flat pry or trim tool to lift the gauge (not included in the box).
What if it doesn't fit — or I change my mind?
Defective, damaged, or missing parts: contact us within 30 days with photos and we'll send a replacement or refund you in full, no cost to you. Changed your mind: returns are accepted within 30 days if the item is unused and in original packaging — you cover return shipping and a 25% restocking fee applies. So ask the fitment question first: it's free, and we answer within a day.
Do you ship to Australia, the UK, and Europe? What about duties?
Yes — worldwide, tracked, shipped from North America. USA and Canada: 3–7 days, $20 flat. International: 7–21 days, $60 flat. Orders are processed in 3–5 business days. International orders can attract local customs duties or taxes — those are the buyer's responsibility and aren't included in our prices.