Rinashi air-cooled Porsche 911 gauge phone mount with phone installed

Porsche 911 Phone Mount Guide: Gauge vs Vent vs Suction

For an air-cooled Porsche 911, the cleanest phone mount is usually a no-drill gauge mount. It keeps the phone close to the driver's natural sightline, avoids old vents, and does not ask you to drill into original dashboard trim.

This guide compares the common Porsche 911 phone mount options: gauge mounts, vent clips, suction cups and adhesive pads. If you want the short version, the Rinashi Air-Cooled 911 Gauge Phone Mount is the best fit for classic 911, 964 and 993 interiors because it is purpose-built around the car's gauge layout.

Quick answer: choose a gauge mount if you care about reversibility and cockpit fit. Avoid vent clips if your vents are fragile, avoid suction cups if you hate windshield clutter, and avoid adhesive pads on original dash trim.
Rinashi Porsche 911 phone mount packaging box with black logo lid

Porsche 911 Phone Mount Options Compared

Option Works best for Main downside Verdict for classic 911s
No-drill gauge mount Air-cooled 911, 964 and 993 owners who want a clean cockpit You need to choose left/fuel gauge or right/clock side Best overall choice
Vent clip Modern cars with strong vents Can stress old vent slats and block airflow Usually not ideal
Suction cup Temporary use or rental cars Can fall in heat and clutter a small windshield Functional but ugly
Adhesive dash pad Replaceable modern trim Can mark original dash material Avoid on valuable interiors

Why Gauge Mounts Fit Air-Cooled 911s Better

The 911 cockpit is built around the gauge cluster. Your eyes already move there while driving, so a phone mount near that area feels more natural than a low console mount or a bulky windshield arm. A gauge mount also keeps the phone out of the shifter and handbrake area.

That is why the Rinashi mount uses the gauge area instead of a vent or suction cup. It is designed for Porsche 911 models from 1965-1998, including 964 and 993 interiors.

Air-cooled Porsche 911 gauge phone mount with wireless charging puck installed

Left Fuel Gauge vs. Right Clock Position

The Rinashi mount is available for two positions: left side near the fuel gauge or right side near the clock. Neither choice is universally better. It depends on how you want to use the phone.

Choose left/fuel gauge if:

  • You want the phone closer to your normal sightline.
  • You use navigation often.
  • You prefer the phone closer to the driver side.

Choose right/clock if:

  • You want the phone slightly farther from the primary driving gauges.
  • You prefer a cleaner driver-side view.
  • Your personal seating position makes the right side easier to reach.

Mount Only vs. Wireless Charging

The mount-only version is the simplest choice. It gives you secure phone placement without extra wiring. Choose it if most of your drives are short or you do not care about charging in the car.

The Mount + Wireless Charging option is better if you use navigation, music or route tracking on longer drives. It keeps the same gauge-mount location while adding charging for longer sessions.

Wireless charging cable routing for Rinashi Porsche 911 phone mount

Which Rinashi Setup Should You Buy?

Use case Best setup
You only need clean phone placement Air-Cooled 911 Gauge Phone Mount - Mount Only
You use navigation often Air-Cooled 911 Gauge Phone Mount - Mount + Wireless Charging
You have an earlier classic 911 and want phone + drink storage The Classic 911 Bundle
You have a 964 or 993 and want phone + console cup holder The 993/964 Bundle

Installation and Reversibility

The best classic Porsche accessories are the ones that can come back out cleanly. A phone mount should not leave holes, glue marks or damaged vents. The Rinashi gauge mount is designed around that no-drill rule.

Before installing any phone holder, check three things: visibility, gauge clearance and reach. The phone should be easy to glance at without blocking critical driving information or interfering with your steering wheel and controls.

Related Rinashi Guides

Frequently Asked Questions

What is the best phone mount for a classic Porsche 911?

For most air-cooled 911, 964 and 993 interiors, a no-drill gauge mount is the best option because it fits the cockpit layout without using old vents, suction cups or adhesive pads.

Does a vent phone holder work in a Porsche 911?

It can work temporarily, but it is not ideal for older interiors. Classic vents can be fragile, and a phone can add more weight than the vent slats were meant to hold.

Will a gauge phone mount block my gauges?

A good gauge mount should be adjustable and positioned so it does not block the critical driving gauges. Choose left or right placement based on your driving position and visibility preference.

Does the Rinashi 911 phone mount fit 964 and 993?

Yes. The mount is designed for air-cooled Porsche 911 interiors from 1965-1998, including 964 and 993 models.

Should I buy wireless charging?

Choose wireless charging if you use navigation, music or route tracking on longer drives. Choose mount only if you want the simplest setup.

Shop Porsche 911 Phone Mount Setups

Back to blog